Hand-Held Hubble
PVC Model
Make a scale model of NASA’s Hubble Space Telescope using easy-to-find supplies and our printable materials.
This model can be assembled by young children, but requires a trip to the hardware store — and an adult to help use tools.
Difficulty: Average
Durability: Sturdy
Detail: Low
This basic model of the Hubble Space Telescope is made out of PVC pipe. You can find the parts at local hardware and craft stores for under $30, and it should take about 1-3 hours to build. You’ll need an adult’s help for some of the construction.
This model reflects the state of the telescope after Servicing Mission 3B, which took place in March 2002.
Directions and Pattern Sheets
We provide PDF downloadable wrappers to put around your model, Directions, and Shopping List. Choose either the Black-and-White Wrapper or the Color Wrapper, then print the Wrapper on regular paper.
Important — Printing the Wrapper
You may need to adjust your printer options in order to print the Wrapper at the correct size. On the first page of the printout is a gauge that allows you to check the printout’s scale. Use a ruler to make sure the "1 inch" mark is actually an inch long. If your printout doesn’t measure up, make the following adjustments in the Print dialog box:
- If you’re using Adobe Reader 6 or higher, set "Page Scaling" to "None."
- If you’re using Acrobat 5, deselect "Shrink Oversized Pages to Paper Size" and "Expand Small Pages to Paper."
- If you’re using Acrobat 4, deselect "Fit to Page."
Downloads
Supplies
- Drill with 3/16"drill bit
- Instructions printed on regular paper
- Saw
- Miter box (optional)
- C-clamp or vise
- Sandpaper or file
- Scissors or craft knife
- Stapler
- Ruler
- Pencil
See the Directions for complete printing instructions and supplies.
Important Safety Information
This model requires the use of power tools. Adults must be present to supervise children attempting to construct this model. Eye protection is strongly advised.
Designer
Max Mutchler
